1. Set aside the top cross rails
2. Identify the reinforced cross rails
(if your cabinet has them)
3. Sort out the lower cross rails
4. Apply paraffin wax on cross rails
5. Insert the wooden foot into the steel corners
(if your cabinet has them)
6. Insert the aluminium foot into the steel corners
(if your cabinet has them)
7. Insert the cross rails into the steel corners
8. Insert the distance pieces into the steel corners
9. Slide the panels into the distance pieces
10. Insert the first shelf
11. Close the first compartiment then repeat the previous steps
12. Insert the last cross rails
13. Place the cabinet without scratching the floor
14. Insert the shelves
15. Insert doors
16. Insert the adjustable pads
(if your furniture has one)
and level the cabinet
17. Level the cabinet
using the shims provided
Compartment with 4 doors
Identify and place the cross rails
Place the shelves and the doors
Shelves, columns and cabinets without doors
Identify and place the cross rails
Compartments less than 27 cm high
Install the shelves
Compartments for wardrobes
Install the interlock triangles
Place the wadrobe rod
Placer les portes de la penderie
Preparing to assemble the mounted cabinet
Assemble the wall mounted cabinets
Screw the steel corners
Fix the cabinet to the wall
Summary of the concept*
*This video shows an overview of the system. For a complete editing, you must read the previous videos.
Drawers
Wax the steel corners of the drawers
Assemble the back part
and insert the shelf
Assemble the front of the drawer
Screw the knobs
(if your drawer has one)
Screw the wooden slats
(if your drawer has one)
Screw the handles
(if your drawer has one)
Paraffin supports
Place supports of the drawers
Caster base
Intermediate shelves
Locks
Place the slot locks
(if your furniture has one)
Place the rack locks
(if your furniture has one)
Place the barrel locks
(if your furniture has one)
coming soon !
Vidéo en cours de réalisation, ça arrive bientôt !